P.W. Electroplating-PowderCoating-Anodising
P.W. Electroplating-PowderCoating-Anodising
PW - Electroplating - Powder Coating - Anodising
                   PW - Electroplating - Powder Coating - Anodising                                                                                     

P.W Electroplaters and Powdercoaters Pitt Lane

Talke Pitts ST7 1UH


Phone: 01782 772731

 

Fax:     01782 786868

 

Or use our contact form.

Where to find us:

Business hours : 8 am until 5 pm and 10 pm until 8 am Monday to Friday

What's new?

OUR NEW WEBSITE : 1/6/2013

 Welcome to our new website launched June 2013, here you will find a list of the services we provide and a few imagines of parts processed at this plant. I hope it will also give you a feel for the company ethos and the people behind P.W.

THERMO FISHER PREFFERED SUPPLIER STATUS:  May 2013

PW are delighted to have been award 'preffered' supplier status for Thermo Fisher Scientific. A company employing over 39,000 and with a turnover in excess of $13 billion dollars a year. This approval refers to all anodised components Thermo currently sub-contract.

PLANT UPGRADE : 15/6/2015

PW have upgraded our barrel plating capabilities. 5 new process rigs and barrells plus new anode cages, will have a significant effect on the quality and turnaround time of high volume parts.   

 

 

 

 

 

 

 

 

Solutions and services

Acid Zinc Electoplating: A sacrifical coating to protect the base material, zinc decomposes slower than ferrous substrates extending the life of your product. Both the thickness of the zinc coating and the top coats applied can be altered to add further protection.

  • Rack and Barrel facilities (up to 3.5 metres)
  • Zinc and Trivalent passivate (both thick and thin filmed)
  • JS500 Silicon top coat
  • Zinc and Gold passivate 
  • Zinc and olive passivate 
  • Zinc and trivalent black passivate 
  • Zinc and no passivate 
  • Thicknesses from 5 microns to 25 microns 
  • Hydrogen De-embrittlement 
  • Finishes provided to British, European and American specification
  • Certificates of conformity available on request 

 

Electrostaic Powder coating: Powder coating is the process of coating a surface in which a powdered material is applied using an electrostaic or compressed air method. The applied powder is then heated 'cured' to its melting point, after which it flows to form a smooth film which dries to a firm, durable finish, resistent to scratch, cracking, peeling and UV rays.

 

 

  • Up to 5 metres in length 
  • Epoxy
  • Expoxy Polyester
  • Polyester
  • Nylon
  • Anti-bacterial 
  • Finishes provided to British, European and American specification
  • Certificates of conformity available on request
  • Large stock of paints held on site 

 

Decorative Anodising/Colour anodising: Sulphric acid anodising is the most common protective treatment for aluminium and leaves a clear, silver coloured finish  which before sealing is receptive to dyes. The anodising process requires oxsidation of the aluminium surface under controlled conditions to form a thin layer of aluminium oxside.

 

 

  • Capacity up to 1.2 metres
  • Varying thickness from 5 - 25 microns 
  • Finishing available in Gold, Black , Blue, Red, Green and Natural (silver) 
  • Matt and gloss finishes available
  • Thermo Fisher Scientific preferred supplier status
  • Finishes provided to British, European and American specification
  • Certificates of conformity available

 

Chromate Conversions: General used as a pretreatment before painting, chromate conversion are non electrolytically applied to form a uniform corrosion resistent coating for aluminum. 

 

  • Alocrom 1000
  • Alocrom 1200
  • Surtec 650 

 

Miscellanous:

 

  • Collection and Delivery available on request.
  • Free technical advice

 

 


Print Print | Sitemap
© P.W Electroplaters and Powdercoaters